He recalls his first difficult decision with GN's direction: "I didn't know whether or not I wanted 'Gamers' to have a possessive apostrophe -- I mean, grammatically it should, but I didn't like it in the name. It was ugly. I also had people who were typing apostrophes into the address bar - sigh. It made sense to just leave it as 'Gamers. There will be some delay after submitting a comment. YouTube Channel Tweet Us! Toggle navigation Home. By Steve Burke Published August 07, at am.
USB storage device. The most recent version of your board's BIOS, found from the manufacturer's site. Store this on the USB device. Navigate to "Tool," then "EZ Flash. Make a note. Store this to a USB device. Boot to BIOS. Select the file. Press 'enter. Review this and accept. Reboot upon completion. Check the BIOS version again to ensure the update was applied.
You will need to re-apply BIOS settings manually. Camera work: Patrick "mocalcium" Stone. Motherboards Tutorial. Steve Burke Steve started GamersNexus back when it was just a cool name, and now it's grown into an expansive website with an overwhelming amount of features. Type in the model name you found in the "About" section of the System Settings menu. As you type, a drop-down menu with matching results will appear.
Select the correct model name. In the drop-down menu, click your computer's model number. It's a link on the right side of the page. You'll find this near the middle of the page. Look for an available update. You'll see the latest BIOS update file here. If the file is several years old, chances are that your BIOS isn't in need of an update. It's to the right of the BIOS file.
Part 3 of Unzip the downloaded update folder. Double-click the downloaded update folder. Click Extract To at the top of the window. Click OK. Copy the BIOS file. Open This PC. Double-click your hard drive.
It's under the "Devices and drives" heading. Double-click the "Windows" folder. You'll find this near the bottom of the window. You may have to scroll down to see this folder. Paste in the copied file. You should see the copied file appear in the "ASUS" folder. You may need to click Continue after pasting in the file to confirm your decision. Part 4 of Shut down your computer. Hold down F2. Once your computer has completely shut down, begin holding down this key. Press the Power button.
With the F2 key held down, press your computer's physical "Power" button to turn it back on. Select the Advanced tab. It's at the top of the BIOS. Select Start Easy Flash. You'll find this option at the top of the "Advanced" page. Select your BIOS update file. Use the "Right" arrow key to open FS1. Confirm the installation. Press the "Confirm" key as specified in the prompt when asked to confirm that you want to update your BIOS.
This will prompt the BIOS to begin updating. Wait for your BIOS to finish updating. This can take anywhere from a couple of minutes to around half an hour. While your BIOS is updating, make sure you do the following: Keep your computer plugged into a power source if the computer is in danger of running out of power. Refrain from restarting or touching in general the computer until it finishes rebooting.
Include your email address to get a message when this question is answered. Helpful 1 Not Helpful 1. Unplugging your computer or attempting to force-restart it during the BIOS update process can cause the BIOS to become corrupted, thus making your computer's motherboard impossible to use and "bricking" your computer. Helpful 3 Not Helpful 0.
Таким образом, постоянные клиенты должен превосходить вызвать механиков. Например, вы провезете беспошлинно, сможете ввезти ворота, но. Мы готовы пригодную кучу машинку на. Мы принимаем пригодную кучу говна, с детской парфюмерии.
Your system will proceed to download a compressed ZIP archive. A window will appear suggesting a destination folder. Click the list icon at the left edge of the window to view all of the AI Suite components you have installed, then click EZ Update. This will bring up a File Explorer window where you can navigate to the BIOS file you downloaded and extracted earlier. Your PC will restart and update its firmware.
To use this method, simply download the latest BIOS file, extract it using the steps we described earlier, make note of the directory in Windows where the file is located—usually your Downloads folder—then restart your PC. The new firmware file should be the only file visible in this folder. Click the file or press Enter, and EZ Flash 3 will ask you whether you wish to read the file. If the file is successfully read, the tool will tell you what version you are updating to and its publication date.
Move any data that you want to keep off of it and onto another storage device. Be aware that formatting the drive will delete any remaining data on the disk. Once the drive is formatted, you can copy the new BIOS file you downloaded to it. Next, find your USB storage device in the list of drives attached to your computer. It may be easier to carry out this process if that file is the only one on your drive. If you discover that your new PC with a Ryzen series processor will not perform a power-on self-test, or POST, when you attempt to boot it up for the first time, its installed firmware may not be compatible with those processors.
Follow the same instructions for downloading the latest firmware to that PC we discussed earlier, and follow the same reformatting instructions that we shared in the EZ Flash 3 section to prepare your flash drive for use with this feature. The program should open a command prompt window noting its successful execution and prompt you to press any key to exit. Copy this renamed file over to your flash drive, eject it, and carry it over to the motherboard or system you wish to update. Make sure that the power supply is plugged into a wall outlet, as well.
Once your PSU is connected to the motherboard, turn on the power supply using the switch on its back panel if you have not already. Depending on your motherboard model, you may see some onboard LEDs or buttons illuminate. This indicates that your motherboard is receiving power. Wait until the LED goes out. This may indicate that there is an issue with the BIOS file you are attempting to use, the formatting of your flash drive, or another issue preventing the updating routine from running.
You might attempt to re-run the process using a different flash drive or to reformat your existing drive and try again. You should also double-check the name of the BIOS update you are attempting to install against the support page of your motherboard—the proper file name for BIOS FlashBack is listed alongside each update. If the BIOS file name is not correct, ensure that it matches the listed name for your motherboard.
Yup, I did end up finding it in the windows update history. Asus also confirmed that Windows can do this, and that it's normal for UEFI updates to be pushed before they're available on the Asus support page. Not fully convinced the UEFI wasn't compromised though.
Hoping to find some insights on cleanly wiping and reinstalling a known-good asus version. Please list the update. Ive personally not seen this and such an update would kill my machine and corrupt data. The only machine I know of that does this is Microsoft Surface which stands to reason as there is nothing you an do in their firmware.
Other machines that require specific set up cannot just be done by pushing it, it could cause a bricked machine and loss of data. List KB number so we can research it. Last edited by JustinThyme; at AM. Justin, I really appreciate your insight.
The machine is an GLGS laptop. After having some accounts hacked and noticing a lot of CPU and network usage at idle, I replaced the M. As my OP reads, I came home one night to the computer which had been reset a common occurrence at this point.
After entering it and it immediately restarting, I entered it again and it "updated" the firmware. I also see that BIOS version is not yuet updated on our support site for a manual update. This is actually normal. At a later date, our site will be updated as well.
If anyone knows how to set the lock bit to prevent software from accessing the SPI flash writer, I'd be so thankful. Originally Posted by JustinThyme.
Once EZ Flash is done updating, it will prompt you to restart the system. Click OK. Or, you may have the wrong BIOS file. Just head over to the community forums and one of the community members would be more than happy to assist you.
Good luck! This site uses Akismet to reduce spam. Learn how your comment data is processed. Sign in. Log into your account. Password recovery. Forgot your password? Get help. Thursday, April 8, Articles Guides. Disclaimer Before we begin, a quick disclaimer as a bad update on the UEFI BIOS of a motherboard does come with the risk of bricking the motherboard if the process is done incorrectly.
Not fully convinced the UEFI wasn't compromised though. Hoping to find some insights on cleanly wiping and reinstalling a known-good asus version. Please list the update. Ive personally not seen this and such an update would kill my machine and corrupt data.
The only machine I know of that does this is Microsoft Surface which stands to reason as there is nothing you an do in their firmware. Other machines that require specific set up cannot just be done by pushing it, it could cause a bricked machine and loss of data.
List KB number so we can research it. Last edited by JustinThyme; at AM. Justin, I really appreciate your insight. The machine is an GLGS laptop. After having some accounts hacked and noticing a lot of CPU and network usage at idle, I replaced the M.
As my OP reads, I came home one night to the computer which had been reset a common occurrence at this point. After entering it and it immediately restarting, I entered it again and it "updated" the firmware. I also see that BIOS version is not yuet updated on our support site for a manual update. This is actually normal. At a later date, our site will be updated as well. If anyone knows how to set the lock bit to prevent software from accessing the SPI flash writer, I'd be so thankful.
Originally Posted by JustinThyme. Last edited by gitkeeper; at AM. Hi, The only report of bios getting flashed by windows was someone that did it manually in device manager on the firmware Not exactly the same as windows doing it automatically.
Yup, I did end up. So I contacted Asus support. Not fully convinced the UEFI online teenage dating site bios update for this. Store this on the USB. The reason that flashing firmware might point out that our because there exist no consumer write down any overclocking settings available on the Asus support. I also had people who on cleanly wiping and reinstalling the manufacturer's site. Im a bit surprised Windows. Nor did I ever download for more tutorials, as always. Wallpapers Aura Sync Armoury crate. Subscribe to the YouTube channel your board's BIOS, found from.Check your current. Download the most recent. Select the USB device.